I get 15 FPS in morroblivion even with everything turned off and after installing some optimization mods for oblivion in addition to that I get CTDs every 5 minutes if I am running or jumping, it's really annoying, anybody got a solution? I am using all the required things for morroblivion (obse, unofficial patch,etc...) and used legal versions of the game to install it
specs:
P4 3.6 Ghz
3 GB RAM
GT 210
Mod Order:
0 Oblivion.esm
1 Morrowind_ob.esm
2 DLCShiveringIsles.esp
3 DLCBattlehornCastle.esp
4 DLCThievesDen.esp
5 DLCMehrunesRazor.esp
6 DLCVileLair.esp
7 DLCHorseArmor.esp
8 DLCOrrery.esp
9 DLCSpellTomes.esp
10 DLCFrostcrag.esp
11 Knights.esp
12 Morrowind Lockpicking.esp
13 Morrowind_ob - UCWUS.esp
14 QZ Easy Menus.esp
15 Morrowind_ob - MorroblivionTreeReplacer.esp
16 Morrowind_ob - Conversation.esp
17 Morrowind_ob - Chargen and Transport Mod.esp
18 Morrowind_ob.esp
19 Morrowind_ob - Morroblivion Maps.esp
20 Vacuity.esp
21 Underwater.esp
22 Streamline 2.1.esp
23 Purge Cell Buffers - Cell Change.esp
24 Purge Cell Buffers - Loading.esp
I am also using pixelivion, project obtimization, low poly grass and de-parallaxer (although I found out they don't help at all)
You can try this mod that I
You can try this mod that I just put out, though in your case you probably want to disable lod entirely.
http://tesrenewal.com/forums/morroblivion-mod-releases/rel-morroblivion-improved-landscape-lod-and-fps
Get rid of streamline and use oblivion stutter remover instead, you can look at -
http://wiki.step-project.com/User:Hishutup/OblivionGuide
for a slightly outdated installation guide with some more fix/stabilizing mods. Just doing that should help out a lot on the crashing though. I use heap 5 with 768, check the guide to see how to set it up.
I would also suggest starting from scratch with your files since a lot of those "optimizers" that you used may have done more harm than good as you saw yourself.
I also use oblivion reloaded 3.4.2 ( the newest seems unstable) for water and you can use it for purge cell buffers too (though I dont use it myself), it takes some setting up in the ini files for it to get just the features you want. If you did that the underwater and pcb esps wouldnt be needed though. Not sure what vacuity is, but everything else seems ok.