[WIP] Redoran Interiors

Moar stuff!!!11!!eleven1!one OMG

Tri_In_R_L_int_Lwall_02

Tri_In_R_L_int_Lentrance_01_1

Tri_In_R_L_int_Lentrance_01_2

Tri_In_R_L_int_center_01

Tri_In_R_L_int_arches_01

Tri_In_R_L_int_arches_01 tiled with itself

Tri_In_R_L_int_arches_01 tiled with itself some more!

I'm not sure if it can tile with anything but itself at the moment, kinda useless >.> I'll definitely need to change something, somewhere.

Here's some ideas for columns, the farthest to the left is the original Morrowind model.

Click here

The bridge I'm currently making, just have to sus out some elements underneath it and it's done, I hope.

sum moar piks

I created the entrance piece for the super large halls, Revada already made a connection between small hallways and walls & maybe I need to make one for the 02 wall, one still needs to be made for the large walls and I think everything else doesn't need to connect directly.

More rounded + smooth shading

I had to remove the arch from the bridge since it would have mass clipping with the halls it was meant to be placed in :c So if it can't do that, then what chance does it have? lel. It's less interesting now, but it can tile from both ends.

...And a balcony! such wow 10/10

Tri_In_R_L_pillar_01 & 02, which fit underneath the bridge.

A setup with R_L stairs_03 and also arch_01 over there by itself

Tri_In_R_L_int_stairs_01

A setup with R_L stairs_02

Tri_In_R_S_int_bridge_01, rail_01, pillar_01 and _02

Tri_In_R_S_int_stairs_03 with bridge_01, rail_01, pillar_01 and _02

arches_01 tiled with some other pieces

Tri_In_R_L_int_entrance_01

Tri_In_R_L_int_entrance_02

Changing/tweaking steps so they look much more similar to Revada's, since I may or may not have forgotten he had made some.

Anything that connects to the bridge tiles is just going to have different steps, but the individual ones that have no direct tiling will just be changed to resemble Revada's models.

Tri_In_R_L_long_ramp_01

Tri_In_R_L_short_ramp_01

Nope, I should be fine doing these. I did a bit of reading and experimenting, they'll be UV'd properly this time around :P

Tri_In_R_S_int_Lwall_01, Lcorner_01 & Lcentre_01

Tri_Int_R_S_int_Lentrance_01

Tri_In_R_L_int_railing_01

Tri_In_R_S_int_railing_01

A setup similar to Ald-ruhn's Mages' Guild

Small long and short ramps

Small balcony_01

9001 years later...*

building_02, I think. Anyway,  a comparison of new (top) and old (bottom)

back of the room

Entrance and part of the hole in the floor

*Not actually 9001 years later

edit: building_01 is the exact same, but without a hole in the floor for the stairs

There it is, a Mage Guild room, it's probably in all of them, but I only remember it being in Ald-Ruhn

| I'd of put more interior shots, but you can only go so far without textures and that line was back there ( <- ) near the beginning

Here I am

Some of the Redoran_buildng_02

I'll finish it tomorrow or Monday if things go to plan

There it is. A bit later than expected, but there it is.

Some more pics of it

New vs. Old

[External image]Stairs_05, centre_03 (top), Lcentre_04 (bottom) and rail_02

Stairs_02

[External image]The layout for Ald'Ruhn's Guild of Mages There's some clipping with some of the rooms, but that can be easily fixed.

There's some seams, sadly. Like those 2 tiles that are right underneath the camera and more

yeah, shouldn't be too hard

The ceiling pattern (or half of it) from the first post, textured

idk, eloth gave them to me when he gave me the assets

They're not Morrowind textures, however a few don't tile, like this:

I think it's three, including the one above, that don't tile, but the rest tile nicely.

And in terms of progress, just been UVing and texturing the last few days, and fixing up minor discrepancies and/or making aesthetic tweaksAlmost UV'd completely, just need to adjust the columns and perhaps the panels on the wall and it's done. Of course, there's more that I've done other than just that, but it's basically the same jist