Morroblivion

I have a question I'm hoping someone can help me with about this mod.

First off, thank you so much for making it, and I can't wait until Skyblivion and especially Skywind are finished.

I have previous questions posted here that I was able to answer myself after posting, so I jumped the gun on those, apologies. I'm now having constant crashes (the sky is constantly flashing, looks like flash lightning all the time), so I know I have something wrong - most likely with an Oblivion mod having a compatability issue. But I don't want to play this modless unless (QUESTION:)

Does Morroblivion already include a graphics enhancer? (so its not vanilla Oblivion graphics in Morrowind?)

If not, is there a preferred one to use with this? I have Oblivion Reloaded (which I've seen mentioned could be the problem) and Oblivion Character Overhaul ver 2. I have other Oblivion mods too (though I went sparingly on them, so not too many) but these are the only graphic enhancer ones I have. I also have "Oblivion Enchanted" which when started, a window pops up to tell me its not compatable with "Cast when used" system, but I'm nearly positive that mod is specifically for Morroblivion.

I'm not happy with the major skills I chose for this character so I will be starting over anyway, want to get the mods right this time.

Any help on this would be greatly appreciated.

I followed this installation process to a T (I believe), yet it doesn't seem as though Morroblivion is active.

I have both the Morrowind GOTY edition and the Oblivion GOTY edition, both on Steam. I have OBSE correctly installed. I installed Elys Universal Silent Voice into Oblivion > Data > OBSE > Plugins. I used the Morroblivion installer and got the "success" message.

I then downloaded the resources and Wrye Bash (stand alone version). I put the resource archive into the Bash Installers folder and then installed 00 Core and all the sub-packages using the Installers tab in Wrye Bash. It was successful and the files are both in my Oblivion Data folder and in the Mods tab of Wrye Bash.

My load order starts with Oblivion.esm loaded first and then Morrowind_ob.esm loaded second. All the mods are activated with a green tick.

I close Wrye Bash, launch Oblivion through Steam, click "new game". I start in the Imperial Prison however. I deleted my Oblivion.ini file that was generated in My Documents and also checked the Morroblivion.ini in my Oblivion folder and made sure it was set to starting in Morrowind and not Oblivion.

A link at the bottom of this post can be found to screenshots of my files etc. Have I done something wrong? Was the intro where you choose where you start removed in previous versions as I heard? Am I meant to automatically start in Morrowind, or am I meant to play through the Prison tutorial and then it'll take me there?

I must've skimmed over something! I've been trying for 2-3 hours. Any help is appreciated! Here's a link to all my screenshots.

When I gave up on Morroblivion I went to play Oblivion as is, with a few overhaul mods, and I noticed OBSE wasn't working so I re-installed it and now Morroblivion runs perfectly! Thank you for your help. Can't believe I missed something so small!

This is my first time, so I'm having quite a bit of trouble installing Morroblivion, I've done everything until #2 of part 2 of your instructions, so can you please tell me where and how to unpack the .exe file from archive?

Unpack using 7-zip, location doesn't matter.

Which file do you unpack? Morroblivion_v064_Complete or Morrowblivion_v064_Installer?

i'm new to modding. So i am lost. What does it mean to  Unpack the .exe file from the archive and run it

I can't seem to get it to work :( I followed the instructions to the letter. However, when I launch the game and start a new game, It just starts oblivion rather than morrowind. How can I fix this?

Hi i have some trouble so i did every thing in the installation guide but when i try to open oblivion it crashes at the start :/ can some one help me? 

Ok, so I have completed everything up to the point that I am trying to install the assets through Wrye Bash, they all show up (00 Core, 01 Better Map etc.) I check the box next to them, I tell it to install, then it stops responding... Any ideas as to my problem? Or is this an isolated issue? I have tried reinstalling both the games and wrye bash, I've also restarted my pc a few times. Thank You for any help.

Hi all

Thanks to qwertyasdfgh for the guide, however i'm stuck

Part IIIa. Installing with Wrye Bash

(2)  I have moved the resource archive to Oblivion Mods/Bash Installers folder, but next time I open Wrye Bash, there is nothing showing in the installers tab.  it's totally blank. 

I'm using windows 10, if that makes a difference.   Is anyone able to offer any ideas?.

The resources doesn't show up in Wrye Bash, am I supposed to unzip the resources into OblivionMods/BashInstallers?

And now it says i have an old version of Oblivion when i try to start with the obse_loader, even though it worked perfect before i tried installing morroblivion.

every time i open oblivion i get the error that i need the updated version of OBSE, i am currently using version 21. is it saying this because i didn't install everything correctly?

I have both the Morrowind GOTY edition and the Oblivion GOTY edition, both on Steam. I have OBSE correctly installed. I installed Elys Universal Silent Voice into Oblivion > Data > OBSE > Plugins. I used the Morroblivion installer and got the "success" message.

I then downloaded the 2 GB resource file and Wrye Bash. I put the resource archive into the Bash Installers folder and then installed everything under the Installers tab in Wrye Bash. It was successful in that the files are now showing in my Oblivion Data folder, but they don't show up in the Mods tab of Wrye Bash or under Data Files tab when launching Oblivion.

When I play the game it's complete mayhem, with yellow warning signs everywhere, and I constantly fall through the prison ship. After a short time I get a warning that states that a BSA has failed to load.

What on earth did I do that is causing the files not to load properly? It's especially confusing because WB seemed not to have any trouble "installing" the 00 Core files. I really have no idea where the problem is located, so I took screenshots of everything with the hope that they will help.

Copying it over manually did the trick.  Thanks Brainslasher!

Maybe start it in Admin mode and try a different location for the file.

If you are talking about MorroblivionInstaller_v064 It is saying Oblivion pathway or something like that. You have to go out of your way and find it yourself it wont look for you I had that same issue.

Hi friends,

First off, huge Morrowind fan and a big thanks to everyone supporting the community!

I am having trouble getting the main mod .7zip file to install via Wyrebash.  I place the still archived file into the Oblivion Mods/Bash Installers, then open Wyrebash and click the installers tab at the top.  Wyrebash prompts me to enable installers, which i do, and it "installs" some things as in it looks like an initial setup step for wyrebash.  I then can see the large 2GB file, left click it and i see the sub folders, i check them all, then I right click back onto the large 2GB file and select install and then wyrebash hangs for about 9 seconds, then stops responsding and i have to force quite.  I'm on WIn10 and have diasable UAC via the reg and have also installed both morrowind and oblivion F:\games\steamapps\common\Oblivion (or Morrowind, I've done them both this way) I have been searching online but haven't come up with anything other than disabling UAC.  I do have some previous Oblivion Files from a recent modded playthrough with Mascaras Oblivion Overhaul, but did a fresh install of Oblivion.  I do have prior saved games, but have deleted the Oblivion.ini file as that seemed to be very suggested in the 6 pages of this particular forum.  

Can anyone suggest anything else to keep wyrebash from locking up?  I also tried running it in Admin mode, but it still locked up :/  I'll try installing the 2G file manually after I've extracted it, probably wont have a problem there, but would much rather have wyrebash do it if i could.  

Sorry this got long, thanks in advance!

Please help, every time I start a new game I got this message. I think that I installed everything correctly, but still, there's a chance that I messed up somewhere. 

So I'm having a similar issue to some others, in that I keep getting an error message telling me "You are missing at least one of the core Morroblivion BSA archives." I've tried re-installing things 3 times, to no avail. The only thing I haven't tried is completely manually installing everything, as I like to use Mod Organizer to install my mods to keep my base game folder as clean and vanilla as possible. If anyone could tell me what I might do to get things working with Mod Organizer that would be great, otherwise I guess I'll just have to give up and manually install - and hope I don't muck that up ~.~

Hello all!

I'm fairly certain I've installed everything correctly. Things have been great, with one exception. Seyda Neen works like a charm, but whenever I attempt to enter a building in Balmora (Caius Cosades' House or the Cornerclub, for example), the loading screen appears and then freezes. I still hear the music, but no progress is made on the load. Alt+Tabbing doesn't get me out, nor can i access task manager; this forces me to restart my pc.

Any suggestions or assistance would be greatly appreciated. Thanks!

Its probably Mod Organizer. If you have it managing the BSAs then it makes them disappear and unpacks the files on launch, causing the morroblivion asset check quest to generate that error. Check the morroblivion ini, there is a setting in there for the asset check that causes the popup.

Post your load Order, you should have other files Activated. Beside these 2. needed

Game crashes.

I can't get it to work, but I am new to modding. Here is a screenshot of the different variables (from my limited knowledge). Everything seemed to install correctly according to the instructions above. Script extender doesn't load up with the game, I'm not sure exactly how/when it is supposed to work so that could be the problem. When I start Oblivion it runs for just a couple seconds, I can see the Bethesda title start appearing and the sound is there but it crashes after a couple seconds.

Hello, I am assuming you are talking to me. Here are those folders. Thank you for helping!