Skip to main content

[RELZ] Morroblivion Complete Installation v058

Submitted by thermador on

IMPORTANT:

THIS THREAD IS OUT OF DATE

 

CLICK HERE to download the latest version of Morroblivion.

 

This complete installation (below) is out of date, and the download links have been removed.  Starting with v060, Morroblivion is packed as a complete installation now, rendering this thread unnecessary.  Thanks qwertyasdfgh!

 

 

 

 

 

 

 

 

 

 


O U T D A T E D - Left for posterity, but out of date - go here instead


Given the difficulty and large number of files in a typical Morroblivion installation, I have put together a complete installation that is basically how I have my game set up.

This may not be for everybody, but it should help people out who just want to install the game and get to playing it already.  If you don't like it, you can set up your own version of Morroblivion, starting with the Project Release Thread, or modify my installation.

Most of the screenshots in the gallery are from v053 of this package.

REQUIRED:

  • A modern graphics card, at least 1GB, preferably something less than a five years old and and higher specification, like:
    - Nvidia GeForce 470/480, 570/580, 670/680 etc.
    - ATI Radeon 5870/5970,  6870/6970, 7870/7970 etc.
    You can run Morroblivion on an older card or cheaper graphics card, but you may have to turn down your graphics settings.
  • About 10GB of free hard drive space to download and then extract the files.
  • Oblivion installed, including the Shivering Isles expansion.
  • Morrowind installed, including the Tribunal and Bloodmoon expansions.
  • Knowing how to install mods and manage load order - If you don't know what a 'load order' is, or what Wrye Bash is, then you need to read the Oblivion Mods FAQ (and probably the Morroblivion FAQ) before you get started.

 


U P G R A D I N G


If you already have v050, v051, v052, v053, v054 or v055, see post #288 near the end of this thread for upgrade instructions (each post is numbered at the top).

If you have v056, v057, or 058, just get the new .ESM master file and overwrite the old one, and also get the new resource file and overwrite the old files.

If you have earlier versions than v050, uninstall everything and start from scratch using the instructions below (or don't uninstall and just overwrite, but I can't guarantee that will work).

 


I N S T A L L A T I O N


 

1) Install the following pre-requisites (if you don't have them already)

2) Download the master file (details here - thanks David & qwertyasdfgh!)

  • Download the Morrowind_ob.esm Master File Installer -- v059 -- 48 MB

3) Install the master file

  • Just run the .exe, then enter your Morrowind and Oblivion directories, and then the installer will extract the master file (Morrowind_ob.esm) to your \Oblivion\Data\ folder.

4) Download the complete installation 

  • Download the v058 complete installation file -- v058 -- 2.5 GB (7z file)
    or if that's not working, try an alternate download link (but it will be slower).
  • Download the v059 resource update -- v059 -- 0.2 MB (7z file)
    and install it after you install the big file
    - - - - - - - - - - - - - -
  • Instructions: Click the link, click the "Download" button, then "Download anyway".
    - - - - - - - - - - - - - -
  • OPTIONAL: 7 zip to open this archive and extract the files (if you don't already have it, you should use this for all your .zip/.7z/.rar needs).  OR, instead of extracting the files, just drop the .zip/.7z/.rar files in your /Oblivion Mods/Bash Installers/ folder and install with Wrye Bash!
  • OPTIONAL:  Clothing Galore for Robert's v5 and HGEC or Clothing for Female HGEC body by Oldwolf58 - ONLY IF you are using these body replacers.  Clothing Galore is newer and better - I recommend that one.  Make sure to disable the vanilla clothing replacer that comes with the complete installation by unchecking it in your load order.
  • OPTIONAL: Almalexia Race for HGEC Body by HelpfulPerson - ONLY IF you are using the Female HGEC Body replacer and you want Almalexia to have the right body.  You don't need the .esp file, just the meshes and textures.
  • OPTIONAL: DARNified UI for Oblivion and then Morroblivion Themed Loading Screens by qwertyasdfgh and Protocolled Dialogs by Eazzy - These make reading the large amounts of dialogue in Morroblivion much easier.  Fancy stuff!  ALSO you should check out this quick tip for customizing your DARNified UI - SUPER COOL!!!
  • OPTIONAL: OBGE v3 (latest RC versions, not Nexus versions) - if you have the graphics power to run Morroblivion, then you should be running Oblivion Graphics Extender anyway.  The shaders (especially Godrays v6, Liquid Water, the Anti-Aliasing (AA) plugins, and the Ambient Occlusion (AO) plugins) really improve things, getting the game back to a darker, more "Morrowind" feel (especially if you spend some time tweaking OBGE settings).  If you are using Wrye Bash, you can get the BAIN-ready archives that install in a jiffy with Wrye Bash's installers tab.
  • OPTIONAL: Any of these additional Morroblivion mods that have been developed here at Morroblivion.com (or check the Mods Forum for works-in-progress)

5) Install the complete installation - EITHER

  • Use Wrye Bash's installers tab to install the files so that you can easily remove them later. You can load the archive (.7z file) directly in Wrye Bash without extracting if you want - just put the .7z file in the "Bash Installers" folder, go to the Installers Tab, right-click Morroblivion and choose "Install".
    (recommended, get Wrye Bash here, you should be using it to install and manage all of your mods!)
    OR
  • Manual install: Extract the files from the .7z archive to your \Oblivion\Data\ directory
    (recommended if you regularly back up your \Oblivion\Data\ directory)
    OR 
  • Use OBMM or NMM to make an OMOD from the extracted files. It will take several hours to pack the OMOD, and OBMM may crash (NMM is recommended if you want to use one of these programs). 
    (NOT recommended, unless you've got time to kill)

6) Observe this INSTALL order

  1. Install the three pre-requisite mods listed at the top.
  2. Install the 2.5GB complete installation, and also the Master File (Morrowind_ob.esm) through the .exe installer
  3. OPTIONAL: After that, install other updated Morroblivion files, including version upgrades, bugfixes, or patches (if any exist)
  4. OPTIONAL: After that, install any other Morroblivion mods or components that you want to use, including the HGEC stuff linked above, the Morroblivion UI mods for DARNified UI, or any of the additional mods listed here.

7) Observe this LOAD order

  1. Oblivion.esm
  2. Morrowind_ob.esm - must load immediately after Oblivion.esm
  3. ... any other ESM/ESP mods whatever ...
  4. The "Morrowind_ob" ESP files that come with this complete installation - make sure to activate them ALL in your mod list. (If there is a component there that you don't want in your game, then don't activate it.)
    Load order of the ESPs shouldn't matter but if you are having problems, put the Morrowind_ob ESP files at the END of your load order -- ESPECIALLY the Chargen and Transport mod, which can conflict with other mods that change character generation or create quick starts.
  5. Any other Morroblivion mods or components, including the HGEC stuff linked above and any Morroblivion updates, patches, or bugfixes. These should all load AFTER other Morroblivion ESP files.
  6. ... any other ESP mods whatever ...

8) Play the game!

  • Start a new game, and you will be given an option for where to start (be patient, it can take a moment for the dialogue box to pop up)
    OR
  • With an existing character, travel to the imperial city prison courtyard, find Kisimba sweeping during the daytime, and get her to take you to Vvardenfell (details and screenshots here)

 

 

 

 


C R E D I T S


This pack includes the following mods!!!  THANK YOU to everyone who built these.  This pack DOESN'T include mods that change how vanilla Morrowind was (i.e. new voice overs, additional player homes, etc.).  My goal is staying as true to the original Morrowind as possible but taking advantage of the graphics capabilities of Oblivion).  If you think I missed something, let me know.

Morroblivion Project Release by David B and qwertyasdfgh (and countless others!)
This is the main Morroblivion project release thread - this is where it all started and continues to be done!  Everything on this page is integrated (core files, support files, Vvardenfell Imports, etc.).

Hi-Res Textures and Normal Maps by Hashmi
A compilation of several popular Texture replacers for TES3:Morrowind, for example Connary and Qarl's work ... which have been made useable for Morroblivion (all textures also have Normal maps added).

Visual Overhaul by Eloth
Adds Hi-Resolution textures, Normal Maps, Specular Maps and Parallax maps to Landscape and Statics (Buildings). Separate parts are available for Ingredients, Plants, Clutter and Soulgems etc.

Tree Replacer by Eloth
Replaces the blocky and flat trees of Morrowind with equivalents from Oblivion and the Shivering Isles.

Clothing Replacer by Eloth
Replaces dis-proportional, seamy, blocky and blurry Morrowind clothes with Oblivion clothes (robes get replaced by remade versions of the originals).

Weapons by HelpfulPerson
Adds High-Resolution textures and normal maps to weapons (new textures by Helpfulperson).

Weapons by Darknut
Adds High-Resolution textures and normal maps to weapons (uses Darknut's sharpened Textures).

Misc. Textures by HelpfulPerson
Adds High-Resolution textures and normal maps to a variety to different objects (some clutter, some weapons, some ingredients)

Bloodmoon Texture Replacer by Helpfulperson
Adds High Resolution textures to Statics (like Buildings and Caves) in Bloodmoon.

Collision Redone for Eloth's Visual Overhaul by Hashmi
Collision meshes redone to solve some lag and stability issues ... with Parallax Mapping enabled and some texture paths re-directed so that it works with Eloth's Visual Overhaul.

Voiced Greetings and Combat by robertneville777 and qwertyasdfgh
Adds back Morrowind's voiced greetings and combat taunts.

Map replacer by Iceburg
Adds a higher resolution World map for Vvardenfell\Solstheim\Mournhold. This map is actually a scanned version of the TES3:Morrowind 'Paper Maps'.

Better Morroblivion Water v1.2 by Eloth
Completely revamped exterior/dungeon/interior/cave water.

Chargen And Transport Mod v9 by Thermador
A more robust world transport mod; is compatible with Open Cities, gives you a choice of where to start, makes the journey cost time and money and lets you skip the tutorial levels etc.

Morroblivion Silt Strider Overhaul by qwertyasdfgh
Improves textures and look of Silt Striders.

Universal Cast-When-Used System by qwertyasdfgh
Fixes many magic items in the game. 

Better Landscape LOD by gruftikus
Greatly improves distand land, should lower crash frequency if you have distant land enabled.

Morroblivion Environment by qwertyasdfgh
Improves grass and terrain!

Karma: 0 (0 votes)
Last edited by thermador on 12 Sep 2013 - 07:51.

I have tried downloading the 2.5 GB file for Morroblivion 4 times now and it keeps getting interrupted, saying unknown network error. I'm using Google Chrome.

Karma: 0 (0 votes)

This is the most amazing thing that has happened to me, I'm more pleased about this than i was when skyrim came out. Thank you, i never got to play morrowind because the hitboxes was too poor with the recognition that i couldn't really play it. Oblivion was my preferred game engine and this is just outstanding.

Karma: 0 (0 votes)

Updated for v055!

----

Changes to my release pack from v054->v055 include:

----

If you have V050, V051, V052, V053 or V054 already installed you can upgrade to V055 by downloading the following files and then copying them over the files that you downloaded with the previous version, replacing (overwriting) everything.

1) Get the updated ESM master file:

2) Get the updated meshes and textures:

3) Updating the following files (optional but recommended):

 

 


 

Karma: 0 (0 votes)

Your link is not the same as above your might have been downloading v054 the link above does download from mediafire try again

Karma: 0 (0 votes)

I have 0.54 on my pc. Is it nesessary to download the big file or just the esp?

I have downloaded the big 0.55 file and the files in MENUS folder are corrupted (more specifically the N subfolder)

If I dont copy that there will any problem?

There was Morrowind_ob - Faction Relationships.esp in 0.54 and now you have added Morroblivion - Faction Relation_0.esp too. Shall I remove the previous or run them together?

Ok I m a bit confused. In my data i have same mods with different names, for example:

Morroblivion - UCWUS.esp and Morrowind_ob - UCWUS.esp

Morroblivion Conversation.esp and Morrowind_ob - Conversation.esp

and others... what shall i keep? 

Karma: 0 (0 votes)

If the file you downloaded is corrupt, then you need to download it again.  I just downloaded the 2.5Gb file to check it, and it's not corrupt.  File size should be 2,768,207,913 bytes when downloaded (not "size on disk", just file "size" when you check the right-click properties of the file in windows).

Karma: 0 (0 votes)

I think it would be better if you create many small big-files (250MB for example) so if a tome is corrupted, we can download only this corrupted big-file.

Also a good thing is the torrent file. In torrent client you can see all the files and you can select which files or folders to download only. This way, we can re-download the torrent and select only our corrupted folders to download. Fast and accurate.

Karma: 0 (0 votes)

Just want to say thanks. I am enjoying the mod very much and I wanted to congratulate those invovled.

Karma: 0 (0 votes)

Downloading now.  Only 4 hours left :D

Thank you all for doing this.  Once I get this up and running, I think it might be time for me to start getting my modding hat on.  Never modded before, but I am a programmer and have been a fan of these games forever. 

Karma: 0 (0 votes)

i cant hear the voice of anyone help?
Karma: 0 (0 votes)

There is no voiced dialogue to hear.  That is the way Morrowind was.

Karma: 0 (0 votes)

mod that helps the dialogue because I just can't read it so fast it is impossible

Karma: 0 (0 votes)

I read that people who have the Oblivion GOTYE should NOT install the Unofficial Oblivion Patch. Can someone with the Game of the Year edition tell just how manditory the UOP is to this mod?

2ed question: I can run Oblivion fine with onboard graphics because the computer is less than a year old. Does this mod really make the game that more demanding on the system?

Karma: 0 (0 votes)

First off I'd just like to say thank you to the modders that made this mod! I've been playing since version 52 and it's brilliant!

But throughout my gameplay, I've noticed a couple bugs that i think are related to thermador's complete install, so i was hoping someone could help me resolve these. These bugs aren't gamebreaking, they're just immersion breaking really.

1) Purple Mummies.

As I've said, i've been playing since V52. When a new version comes out I do a complete uninstall and reinstalll of Oblivion along with the new Morroblivion master and the new complete install package. But i've noticed throughout all these versions that the decorative mummies you sometimes encounter are still purple, as in they have no texture! One such example would be (mild spoiler, i'll keep this a spoiler free as i can) where i go to a cavern and get a ring. Here all the mummies are purple. I can provide a screenshot if necessary. Does anyone have a solution to this?

2) Morrowind Cutscenes.

Again, mild spoiler. When i go to this cavern, mentioned above, and get this ring, a cutscene should be played. However it doesn't. When i look into my Oblivion/data/video file, i can see that the complete install has installed the cutscene "mw_cavern" here, it just won't play in-game. I've tried renaming this to "mwcavern" and "mw cavern" ect. but it still won't play. The intro cutscene plays in-game, it just that (thus far anyway) this is the only morrowind cutscene that won't play.

Any help that can be offered would be appreciated. Once again, thank you for the mod!

Karma: 0 (0 votes)

Don't think i have problems with the purple mummies, i assume you have shivering isles installed aswell? As for the cutscene i will have a look at that for you when i get my proper computer back (getting fixed on me crappy other computer atm).

Karma: 0 (0 votes)

Thank you for taking the time to look into this Gidz! And yes, i have the steam "Game of the Year" versions of both Morrowind and Oblivion.

I just had a quick look on youtube to see if anyone has uploaded a youtube video of these two issues, this was the first one i found and it perfectly demonstrates the two issues i've been having (no cutscene and purple mummies):
http://www.youtube.com/watch?v=ph2rizkb_So

I also just checked the bug report page to see if any of these have been reported. The post on this page, posted a month ago, seems to suggest that the mummies texture paths are incorrect:
http://morroblivion.com/fixed-mummies

Though i'm no modder, so i am unsure if this infomation makes any sense at all!

Karma: 0 (0 votes)

Don't worry it makes perfect sense, and thanks for finding the bugs. Should get my proper computer next week and then it should be an easy fix, it's just a matter of using a script to fire the cutscene in the right place and then assigning the correct texture paths for the models. :)

Karma: 0 (0 votes)

Fanstanstic news! Thanks for responding to my post. I'm glad to have helped. I look forward to playing Morroblivion with cutscenes and without purple mummies!

Karma: 0 (0 votes)

Hmmm, that cutscene SHOULD be in there.  Guess Dave never merged the patch I sent him, or it got overwritten.

As far as the purple mummies, if anyone has a fix for that that'd be great.

Karma: 0 (0 votes)

Qwerty has sorted out the issues with the purple mummies. I won't have my proper comp back for a week-2 weeks so i can fix the cutscene problem myself when i can, but if you have already done a fix for that Thermador could you possibly release it? :)

Karma: 0 (0 votes)

Hi Thermador, I've just found an issue with your complete install file.

Yesterday i posted over on the Bugtracker that i was having issues with the lava in Morroblivion ( http://morroblivion.com/old-morroblivion-lava-still-in-game-in-v55 ). It seemed as though the old lava was appearing in V55 of your Complete Install, despite Qwerty's lava mod being merged with V54.

It turns out that the "meshes" folder which contained the files for Qwerty's lava mod was incorrectly placed WITHIN the current "meshes" folder (so when installed, the path is "Oblivion/Data/Meshes/Meshes"), instead of the two meshes folders being merged together!

However, once i cut the smaller meshes folder, containing the correct lava files, and merged it with the bigger meshes folder in the data folder, i was able to see that Qwerty's lava was working as intended now!

EDIT: I've just checked the new "Morroblivion Additional Support Files 2" download, released for V54, and it seems as though this issue originated here. Much like the Complete Install, this download also has the second meshes folder, containing Qwerty's lava, incorrectly placed within the first meshes folder.

Karma: 0 (0 votes)

Can you guys release a torrent download for this? The google doc's "full download" no longer works and mediafire seems to be down today for all the customized(manual) links.....

 

Karma: 0 (0 votes)

I DL'd Ely's Silent Voice as I didn't have it yet, and already had all other required items. Then DL'd the mod, unpacked everything, and then moved it over to the /Data directory for Oblivion (or in Ely's case, the OBSE plugins folder). I opened up OBMM and set my load order. (made sure the .esm was second in line, then moved the Morroblivion esp's to the very end, just in front of Qarl's DoF). I get a consistent crash on startup. I've tried toying with load order for some time to no avail. 

Oblivion worked before I installed the mod, but now it won't work AT ALL. even if I disable the morroblivion esm/esp's :(

I use Natural weather/environments, realistic water, QTP3, Qarl's 4096 Normals, BT's colormaps 2048, Unique Landscapes, Animated Window Lighting, Qarl's DoF as stated before, MEAT, the UOP, Streamline, and Operation Optimzation.

I've tried shutting things off, moving them around. etc. nothing helps. Am I missing something here?

Any help you can give would be GREATLY appreciated Thermador 

Karma: 0 (0 votes)

Have you got Shivering Isles installed.?

Try putting the UOP directly after morrowind_ob.esm and if that does not work,try running the archive invaluation tool in OBMM.Or the standalone archive invaluation tool from the nexus.

btw,you have not mentioned the OBSE,if you have not installed it,you need to,and then run oblivion using the obse_loader.

 

Karma: 0 (0 votes)

I have/have tried all of those except trying the nexus's archive invalidation.

So I'll try using it after school and get back to with results regarding that.
hopefully it works . although I can't see how it can. seeing as there'ss no bsa to invalidate for those files.

Karma: 0 (0 votes)

I just wanted to say thank you for putting together this package. I first heard about Morroblivion a long time ago and thought it was about the greatest idea I'd ever heard, but between the state of the mod and the state of my modding skills it just wasn't working for me. I came back recently a lot more prepared, and I'm amazed at how stable (and generally playable) this has become. In particular, the full download package the site pointed me to saved me soooo much time tracking down individual utility mods, and was, in my opinion, a lot simpler to install than some mods with half this level of complexity. It makes me so happy to know that so many talented people are still working on this project, and I only hope as I tinker with/play through it, I can find some way of contributing. Seriously, thank you guys.

Karma: 0 (0 votes)

as I said before, I have everything required. and have tried invalidation with OBMM.

I just got done trying it with the nexus's tool. still no luck.

I'm a fairly tech savvy person, and I can't figure out what could be causing this, so it's really pissing me off >_>

Karma: 0 (0 votes)

Two things. First a big thanks, it's amazing that this is even possible, playing Morrowind in another games engine.

Secondly I had it all running but hadn't installed the UI update, after playing for a bit I was getting annoyed and decided to install it. Having done that it now just crashes to desktop after I try and run it. Tried removing it again and still no luck. If theres no fix I can just start again, but it's a little annoying :)

Karma: 0 (0 votes)

Doom,

I think you might be getting a conflict somewhere between the UI screen and one of the other addons mentioned below,but not sure how.

  • OPTIONAL: DARNified UI for Oblivion and then Morroblivion Themed Loading Screens by qwertyasdfgh and Protocolled Dialogs by Eazzy - These make reading the large amounts of dialogue in Morroblivion much easier.  Fancy stuff!
  • Karma: 0 (0 votes)

    I've now tried removing everything and starting from scratch three times and can't get even vanilla oblivion to work now. Really wish computers weren't so temperamental sometimes lol. Close to giving up and waiting for Skywind.

    Karma: 0 (0 votes)

    Sadly OBGE made my opening main menu invisible.  Did anyone find a work around for this?

    Karma: 0 (0 votes)

    Sadly OBGE made my opening main menu invisible.  Did anyone find a work around for this?

    Karma: 0 (0 votes)

    Quick question about Morrowbilivion, I installed it, works wonderfully, looks great, but I seem to have lost the gondola mesh.... I am getting the WTF I'm a missing Mesh thing, which while funny and somewhat amusing to see, does break the game flow a bit. Could anyone tell me what that file is called? I am not sure, and I can't find it to put it where it belongs.

    Great work on the mod, and the instructions were wonderful! Epic wins all around :D

    Karma: 0 (0 votes)

    @James924 OBGE turn invisible the menu if you use The "depth buffer read function" with antialiasing from Oblivion(work right with obge's antialias shaders like smaa)

    Karma: 0 (0 votes)

    Updated for v056!

    ----

    Changes to my release pack from v055->v056 include:

    ----

    If you have V050, V051, V052, V053, V054, or v055 already installed you can upgrade to V056 by downloading the following files and then copying them over the files that you downloaded with the previous version, replacing (overwriting) everything.

    1) Get the updated ESM master file:

    2) Get the updated meshes and textures:

    3) Updating the following files (optional but recommended):

    Karma: 0 (0 votes)

    I cant make 0.56 work on my computer.0.55 worked fine but this version crashes after bethesda logo.'

    I re-downloaded the files, I replaced them, I made clear install, I re-install everything, but nothing

    Always crashing...

     

    Karma: 0 (0 votes)

    Check yer load order.
    Karma: 0 (0 votes)

    Last time I played Morroblivion I made a clean install while helping a friend install it. I used Optimizer Textures, which I apparantly set to the wrong settings and therefore deleted all of the alpha from Morroblivion textures. So when I woke up feeling like seeing what's new in Morroblivion since the last version I played (want to say around v50) it was really nice to come here and just grab this one big file.

    As always, thank you Thermador. You're work is appreciated as it seriously cuts down on install time. Thank you!

    Ice

     

    ps. I haven't heard anyone mention if we've run a texture compressor on our textures. Once I have the v56 file downloaded and installed, I plan on backing it up and messing around with texture compressors to see if we can reduce file size, unles this has already been done. :)

    Karma: 0 (0 votes)

    I have tried DDSopt but it doesn't reduce the overall package size that much (hundred MB maybe, I forget) and it seems to remove meshes/textures that are used in the game (resulting in NPC's with invisible torsos, for example). 

    Until then, people will have to set their texture size to "Large".

    Karma: 0 (0 votes)

    So ye, when I tried to use that Installer, my anti-virus software spots some sort of spyware on that file and deletes it...

    Karma: 0 (0 votes)

    That's called a false positive, it thinks it's a virus or a rootkit because it's searching your hard drive for Morrowind. You just need to disable your anti-virus when installing and re-enable it when you're done installing.

    Karma: 0 (0 votes)

    So, I installed everything in the right order, put everything in the right load order and everything worked fine. (Having everything together like this is great, btw, so thanks for that.) I played for a few hours and had a merry time. Saved and exited, reloaded, everything was fine. The next day the game crashes as soon as I try to load any saves.

    Any suggestions?

    PS, realized it might be pertinent to mention I play on Steam, used Wrye Bash for installation and OBMM for load order.

    Karma: 0 (0 votes)

    Branovices this is a problem we are trying to figure out.  Only some people have it.

    Please post what Morroblivion mods you are using (all of the Morrowind_ob --- ---- .ESP files you are using in your load order).

    If you can post your entire oblivion load order too, that would be great.

    Karma: 0 (0 votes)

    Hello, it's been a while scence I've last downloaded Morroblivion, (About Version 38?) But I've kept tabs on this for a while now because this really helps me cope with playing the newer Elder Scrolls and I'm really looking forward to Skywind and Skylivion :) Thank you so much for your efforts and it is greatly apreshiated. I remember seeing this the first time and there use to be so many bugs and now it seems like its almost perfection. 

    I do have some questions that I've been trying to find answers to in forums, about what has been changed, but not many of my questions where answered. Where is the appropriate place to ask?

    Karma: 0 (0 votes)

    Check out the Project release thread (there is a link on http://Morroblivion.com/download - ) Dave B posted a changelog each time he did a version update, so its a lot of posts to sift through, but the information is there.
    Karma: 0 (0 votes)

    I've tried downloading the complete installion 4 times now, via chrome and internet explorer, and the first link (that goes to google) fails to even start downloading and the second link starts downloading but always completes halfway through and leaves me with a 1.3 GB file.

    Any suggestions?

    Karma: 0 (0 votes)

    Well I checked out the Project release but I'm really looking for what's actually not done than what has been done or changed. In other words I would like to contribute. 

    When playing Morroblivion things seem accurate but I want to help out with the things that really are incomplete. Such as the Cyrodiil style Mudcrabs and Ancient Ghosts in Morrowind. That's why I was looking for a post on those topics to see what solutions people tried because I looked over some and I remember being mentioned something about the spawnpoints and the Mudcrab/Ancient Ghost Cyrodiil version replacing those. 

    Karma: 0 (0 votes)

    The things that need the most work right now are Tribunal and Bloodmoon.  Getting those fully debugged and fixed is definitely needed.

    Karma: 0 (0 votes)

    Link under Upgrading Doesn't work Page Not Found

     

     

    http://morroblivion.com/forums/morroblivion/mods/morroblivion.com/forums/morroblivion/mods/2173#comment-21698

    Karma: 0 (0 votes)